Jual HMI V815iXN Hakko Monitouch V8
Kami PT. RAT menjual HMI V815iXN Hakko Monitouch V8.
HMI Hakko General Specifications
| V815iXN | V815iXDN | ||
|---|---|---|---|
| V815iXN Power supply | Rated voltage | AC100~240V | DC24V |
| Permissible range of voltage | AC100~240V±10% | DC24V±10% | |
| Permissible momentary power failure | Within 20ms | Within 1ms | |
| Demand (maximum rating) | 90VA or less | 40W or less | |
| Inrush current | 20A,10ms(AC100V) | 30A,1ms | |
| 40A,10ms(AC200V) | |||
| Insulation resistance | DC500V 10MΩ or more | ||
| V815iXN Physical environment | Operation ambient temperature | 0°C ~ +40°C | |
| Storage ambient temperature | -10°C ~ +50°C | ||
| Operation ambient humidity | 85%RH or less (without dew condensation, Max. wet bulb temperature: 39°C or lower) *1 | ||
| Atmosphere | Not exposed to corrosive gas or conductive dust | ||
| Operation altitude | 2,000 meter or lower | ||
| Contamination level *2 | Level 2 | ||
| V815iXN Mechanical | Resistance to oscillation | Vibration frequency: 10–150Hz, acceleration: 9.8m/s 2(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way | |
| Resistance to shock | Pulse shape: half-sine, peak acceleration: 147m/s 2(15G), X,Y,Z: 3 directions, six times each way | ||
| V815iXN Electric | Noise proof | 1500Vp-p (pulse width 1 s, pulse rise time : 1ns) | 1000Vp-p (pulse width 1 s, pulse rise time : 1ns) |
| Static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | ||
| V815iXN Installation conditions | Grounding | Grounding resistance : Less than 100 Ω, FG/SG separation | |
| Structure | Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.) Rear cover: Compatible with IP20 Form: Single unit Installation method: Panel mounting | ||
| Cooling system | Natural air cooling | ||
| Weight | Approx.5.5kg | Approx.5.3kg | |
| Dimensions W×H×D(mm) | 382.8×312.8×81.1 | ||
| Panel cutout (mm) | 369.4×299.4(+0.5/-0) | ||
| Material | Aluminum |
- *1 Keep wet bulb temperature under 39°C to avoid an accident.
- *2 Contamination level is an index that shows the incidence rate of conductive substance. At Level 2, only nonconductive substance is produced, but a temporary conductive state may occur due to dew concentration.
HMI Hakko V815iXN Performance Specifications
| V815iXN Display specifications | Screen memory | 12.5MB |
|---|---|---|
| Display device | TFT color LCD | |
| Resolution W:H(dots) | 1024×768 | |
| Display size | 15 inches | |
| Colors | 65,536 colors (without blinks)/ 32,768 colors (with blinks) | |
| Backlight | LED | |
| Backlight Auto OFF | Lit in normal (Set by the user) | |
| Power lamp | Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs | |
| Contrast adjustment | Fixed | |
| Brilliance control | 3 levels (Adjusted to 128 steps by macro command) | |
| V815iXN Number of characters | 1/4 size | 127 columns × 96 lines |
| 1-byte | 127 columns × 48 lines | |
| 2-byte | 64 columns × 48 lines | |
| Enlargement of characters | X: 1–8 times Y: 1–8 times | |
| Touch switch | Switch resolution | Analog: 1,024×1,024 |
| Mechanical life | 1 million times or more | |
| Surface treatment | Hard coating, Non glare finish 5% | |
| Function switch | Number of function switches | 8 switches |
| V815iXN External interface | D-Sub 9-pin (CN1) | RS-232C, RS-422/485, Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *3bps |
| Modular 8-pin (MJ1/ MJ2) | RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200bps | |
| CF card interface | Compatible with CompactFlash TM | |
| Ethernet | Complies with IEEE802.3 Baud rate: 10Mbps, 100Mbps Cable: 100Ω Unsealed twist pair, Category 5, Max length: 100m | |
| USB | Type A, Type B (Ver1.1) | |
| Clock & Back up memory | Battery | Coin-type lithium primary battery |
| Back up memory | SRAM 512KB | |
| Back up period | 5 years (Ambient temperature at 25°C) | |
| Calendar accuracy | Gap±90 sec. per month (Ambient temperature at 25°C) |
- *3 Only when connected with SIEMENS MPI
pesan sekarang!
Setiap kode tipe HMI Hakko memberikan informasi tentang spesifikasi dan fitur-fitur yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Hakko untuk memilih HMI yang sesuai dengan kebutuhan aplikasi Anda. Sebagai distributor HMI Hakko terpercaya, kami menyediakan berbagai tipe HMI Hakko dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Hakko yang tersedia. Hubungi Kami Sekarang!