Proface HMI PFXGP4402WADW GP4000

Jual Proface HMI PFXGP4402WADW GP4000

Kami PT. RAT MenJual Proface HMI PFXGP4402WADW GP4000

Proface PFXGP4402WADW HMI GP4000 Standard product information

Family

HMI

Series

GP4000E Series

Size

7″ Wide

Model

PFXGP4402WADW

Global Code

PFXGP4402WADW

Proface PFXGP4402WADW Display specifications

Display type

TFT Color LCD / Resistive Film (analog)

Proface PFXGP4402WADW Display size

7″ Wide

Resolution

800 x 480 pixels (WVGA)

Effective display area

W154.08 x H85.92 mm [W6.066 x H3.382 in.]

Display colors

65,536 colors

Backlight

LED

Backlight service life

20,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)^*1

Brightness control

8 Levels (Adjusted with touch panel)

Proface PFXGP4402WADW Touch panel type

Resistive Film (analog)

Touch panel lifetime

1,000,000 times or more, Sweeping 100,000 times or more

Language fonts

ASCII: (code page 850) alphanumeric (including European characters)
Chinese (simplified): GB2312-80 codes
Japanese: ANK 158, Kanji: 6,962 (JIS standards 1 & 2) (including 607 nonkanji characters)
Korean: (KSC5601 – 1992 codes) Hangul fonts
Chinese (traditional): BIG 5 codes^*2

Character sizes

Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts

Font sizes

Width can be expanded 1, 2, 4, and 8 times. Height can be expanded 1/2, 1, 2, 4, and 8 times.

8 x 8 dots

40 char. x 30 rows

8 x 16 dots

40 char. x 15 rows

16 x 16 dots

20 char. x 15 rows

32 x 32 dots

10 char. x 7 rows

1*) To save the life of the backlight, set the panel in standby mode which automatically turns the backlight off when no touch input is detected within a set time.

2*) The display font differs depending on which (language) character, or which size you select. Also, if GP-Pro EX software is used, additional high-quality fonts are available with 16 x 16 or larger characters.

Proface PFXGP4402WADW Electrical specifications

Rated input voltage

24 Vdc

Allowable voltage drop

1 ms or less with lowest input voltage, 10 ms or less with rated input voltage

Proface PFXGP4402WADW Power consumption

9.2 W or less

In-rush current

50 A or less^*3

Voltage endurance

600 Vac, 20 mA for 1 minute

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

3*) For in-rush current, the FWHM (full-width, half maximum) value is approximately 50 μs(when exceeding 25 A).

Proface PFXGP4402WADW Environmental specifications

International safety standards

Surrounding air temperature

0 to 50 °C [32 to 122 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Ambient humidity

85 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)

Storage humidity

85 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)

Dust

0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Proface PFXGP4402WADW is Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN60068-2-6, 5 to 150 Hz, 3.5 mm (0.38 in) max., 1gn pm 3 axes

Concussion resistance

IEC 60068-2-27, 1/2 sinusoidal pulse for 11 ms, 15g on 3 axes

Electrostatic discharge immunity

EN/IEC 61131-2, 4 kV direct contact, 8 kV air contact

Electromagnetic compatibility (EMC)

IEC 61000 – 4 – 5, 0.5 kV (Differential Mode on power supply), 1 kV (Common Mode on power supply)

Proface PFXGP4402WADW Memory

Application memory

FLASH EPROM 32 MB^*4

Backup memory

FLASH EPROM 128 KB

Clock accuracy

Variations in operating conditions and battery life can cause a clock inaccuracy from -380 to +90 seconds per month.

4Capacity available for user application. The capacity depends on how many fonts you load from Editor software.

Proface PFXGP4402WADW Interface specifications

Proface PFXGP4402WADW use Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2)

Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 187,500 bps, Connector: D-Sub 9 pin (plug)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Communication distance: 3 m [9.84 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 3 m [9.84 ft] or less

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

Proface PFXGP4402WADW Structural specifications

Cooling method

Natural air circulation

Structure

Front Panel: IP65 (IEC60529), Enclosure type 4 indoor use only (UL 50) with screw installation fasteners, Rear Panel: IP20 (IEC 60529)

External dimensions

W207 x H152.4 x D38.2 mm [W8.15 x H6 x D1.5 in.]

HMI Touch Screen Proface PFXGP4402WADW yang kami jual adalah barang baru dan berkualitas , hubuni team sales dan marketin kami untuk mengetahui Stok dari HMI Touch Screen Proface PFXGP4402WADW atau pun produk kami lainnya.

pesan sekarang!

Setiap kode tipe HMI Proface terdiri dari kombinasi huruf dan angka yang mengidentifikasi model dan fitur-fitur tambahan yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Proface yang sesuai dengan kebutuhan aplikasi Anda untuk memilih HMI yang tepat. Sebagai distributor HMI Proface terpercaya, kami menyediakan berbagai tipe HMI Proface dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Proface yang tersedia.