Jual HMI Proface PFXLM4301TADDK LT-4301M
Kami PT.RAT MenJual HMI Proface PFXLM4301TADDK LT-4301M
Proface HMI LT-4301M PFXLM4301TADDK Standard info :
HMI Proface PFXLM4301TADDK Functional Specifications
| Type | TFT Color LCD | |
|---|---|---|
| Resolution (pixels) | 320 x 240 (QVGA) | |
| Active display area (W x H) | 115.2 x 86.4 mm (4.53 x 3.40 in.) | |
| Display Colors | 65,536 colors | |
| PFXLM4301TADDK Backlight | White LED | |
| Non-exchangeable | ||
| LED ON / OFF control, adjustable screen saver activation time | ||
| Brightness adjustment | 16 levels of adjustment available via touch panel in the configuration menu | |
| Language Fonts *1 | Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai | |
| Character sizes | 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts | |
| Font sizes | Width can be expanded 1 to 8 times. Height can be expanded 1/2 and 1 to 8 times. | |
| 8 x 8 pixels | 40 characters per row x 30 rows | |
| 8 x 16 pixels | 40 characters per row x 15 rows | |
| 16 x 16 pixels | 20 characters per row x 15 rows | |
| 32 x 32 pixels | 10 characters per row x 7 rows | |
| Memory | PFXLM4301TADDK Application Memory | When using GP-Pro EX: Media: FLASH EPROM Screen Area *2: 16MB User Font Area: 8MB Logic Program Area: 132KB (Equivalent to 15,000 steps）*3 Free Space: NoneRemovable System: None |
| PFXLM4301TADDK Backup Memory | When using GP-Pro EX: Screen Area: nvSRAM 128KB Variable Area: nvSRAM 64KBBattery: Memory / Primary battery for clock data backup (Send back for replacement) | |
Touch Panel | Type | Resistive Film (analog) |
| Lifetime | 1 million touches or more | |
| Interface | PFXLM4301TADDK Serial (COM1) | RS-232C/RS485 x 1 RS-232C (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 15 m (49 ft), 5 Vdc power supply for RS-232C: None) RS-485 (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 200 m (656 ft), Polarization: Setting is required via software when connecting Multiple LTs. Refer to the “GP-Pro EX Device/ PLC Manual” for the setting. 5 Vdc power supply for RS-485: None) *4 |
| CANopen (Master) | CAN-CiA (ISO 11898-2:2002 Part 2), Connector: D-sub9 (pin) | |
| PFXLM4301TADDK Ethernet | IEEE802.3 compliant Ethernet x 1 (Connector type: RJ45, Driver: 10 M half duplex (auto negotiation)/ 100 M full duplex (auto negotiation), Cable type: Shielded, Automatic cross-over detection: Yes) | |
| USB (Type A) | USB 2.0 (Type A) x 1 (Power Supply Voltage: 5Vdc +/-5%, Maximum Current Supplied: 500mA, Maximum Transmission Distance: 5m (16.4 ft.)) | |
| USB (Mini-B) | USB 2.0 (Mini-B) x 1 | |
| Control | DIO (Sink Type) | 20 Points Standard Input (including 2 Points for Fast Input) 10 Points Standard Output, 2 Points for Fast Output |
Note :
*1) Please refer to the GP-Pro EX Reference Manual(link is external) for details on font types and character codes.
*2) Use the screen area when the user font area’s capacity is exceeded – for example, when an image font or a picture font is used.
*3) Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
*4) 2-wire connection is available for RS-485. When a Device/PLC supports 2-wire connection, 4 wires (RXD+, TXD+, RXD-, and TXD-) can be short-circuited to be 2 wires (RXD+ and TXD+ = D1, RXD- and TXD- = D0). For details on the connection, refer to the connection manual.
HMI Proface PFXLM4301TADDK General Specifications
| International Safety Standards | |
|---|---|
| Rated Input Voltage | 24 Vdc |
| Input Voltage Limits | 20 to 28.8 Vd |
| Acceptable Voltage Drop | 10 ms or less at 20.4 Vdc |
| Power Consumption | 10 W or less |
| In-Rush Current | 30 A or less at 28.8 Vdc |
| Voltage Endurance between power terminal and frame ground (FG) | 500 Vdc for 1 minute |
| Insulation Resistance between power terminal and FG | 10 MΩ or higher at 500 Vdc |
HMI Proface PFXLM4301TADDK Environmental Specifications
| Standard compliance | IEC 61131-2 | |
|---|---|---|
| Ambient operating temperature for the display and the rear module | Horizontal installation | 0 to 50°C (32 to 122°F) |
| Vertical installation | 0 to 40°C (32 to 104°F) | |
| Storage temperature | – 20 to 60°C (- 4 to 140°F) | |
| Storage altitude | 0 to 10,000 m (0 to 32,808 ft) | |
| Operating altitude | 0 to 2,000 m (0 to 6,560 ft) | |
| Surrounding Air and Strage Humidity | 5 to 85% w/o condensation (non-condensing, wet bulb temperature 39°C (102.2°F) or less) | |
| Degree of pollution | IEC60664 | 2 |
| Degree of protection | IEC61131-2 | IP20 with protective covers in place |
| Corrosive gases | Free of corrosive gases | |
| Dust | ≤0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels) | |
Atmospheric pressure (Operating Altitude) | 800 to 1,114 hPa (2000 m (6,561 ft) or lower) | |
| PFXLM4301TADDK Vibration resistance | Mounted on a DIN rail | 3.5 mm (0.138 in.) fixed amplitude from 5 to 8.4 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.4 to 150 Hz |
| Mounted on a panel | 3.5 mm (0.138 in.) fixed amplitude from 5 to 8.6 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.6 to 150 Hz | |
PFXLM4301TADDK | Mounted on a DIN rail | 147 m/s2 (15 gn) for a duration of 11 ms |
| Mounted on a panel | 147 m/s2 (15 gn) for a duration of 6 ms | |
| Electrostatic discharge | IEC/EN 61000-4-2 | 8 kV (air discharge) 6 kV (contact discharge) |
| Rediated radio frequency electromagnetic fields | IEC/EN 61000-4-3 | 10 V/m (80 MHz to 3 GHz) |
| PFXLM4301TADDK Fast transients / Burst noise | IEC/EN 61000-4-4 | Power lines: 2 kV Digital I/O: 1 kV Relay outputs: 2 kV Ethernet line: 1 kV COM line: 1 kV CAN line: 1 kV |
| PFXLM4301TADDK Surge immunity | IEC/EN 61000-4-5 | Power supply: CM: 1 kV; DM: 0.5 kV Digital I/O: CM: 1 kV; DM: 0.5 kV Shielded cable: 1 kV CM = common drive DM = differential drive |
| Conducted disturbances induced by radio-frequency fields | IEC/EN 61000-4-6 | 10 Veff (0.15 to 80 MHz) |
PFXLM4301TADDK | EN 55011 (IEC/CISPR11) | 150 to 500 kHz, quasi peak 79 dBμV |
| 500 kHz to 30 MHz, quasi peak 73 dBμV | ||
| Electric field strength | EN 55011 (IEC/CISPR11) | 30 to 230 MHz, quasi peak 10 m @40 dBμV/m |
| 230 MHz to 1 GHz, quasi peak 10 m @47 dBμV/m | ||
| Vibration immunity (operating) | IEC 61131-2 | |
| Protection structure | NEMA TYPE 4X (indoors, with panel embedded) | |
| Protection (front module) | IP65f – (IEC 60529) | |
| Protection (rear module) | IP 20 – (IEC 60529) | |
| Shock immunity (operating) | IEC 61131-2 15 gn 11 ms | |
| Cooling method | Natural air circulation | |
| Weight | 749 g (26.41 oz) | |
| Color | Front module: PT404 Rear module: RAL 7032 | |
| PFXLM4301TADDK Material | Front module: PAA+GF Rear module: PC/PBT |
HMI Proface PFXLM4301TADDK Digital Input Characteristics
| Rated Current | 5 mA | |
|---|---|---|
| Inrush Values | Voltage | 30 Vdc |
| Current | 6.29 mA max. | |
| Input impedance | 4.9 kΩ | |
| Input type | Sink/Source | |
| Rated voltage | 24 Vdc | |
PFXLM4301TADDK | 28.8 Vdc | |
| Input limit values | ON Voltage | 15 Vdc or more (15 to 28.8 Vdc) |
| OFF Voltage | 5 Vdc or less (0 to 5 Vdc) | |
| ON Current | 2.5 mA or more | |
| OFF Current | 1.0 mA or less | |
| Isolation | Method | Photo coupler Isolation |
| Between internal logic | 500 Vdc | |
| Filtering | 0.5 ms x N (N is 0 to 63) | |
| IEC61131-2 edition 3 type | Type 1 | |
| Compatibility | Supports 2 wire and 3 wire sensors | |
| Cable type and length | Shielded: Maximum 100 m (328 ft) Non-shielded: 50 m (164 ft) | |
| PFXLM4301TADDK Terminal blocks | Type: 3.5 mm (0.137 in.) pitch Terminal blocks are removable | |
| Input paralleling | No |
pesan sekarang!
Setiap kode tipe HMI Proface terdiri dari kombinasi huruf dan angka yang mengidentifikasi model dan fitur-fitur tambahan yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Proface yang sesuai dengan kebutuhan aplikasi Anda untuk memilih HMI yang tepat. Sebagai distributor HMI Proface terpercaya, kami menyediakan berbagai tipe HMI Proface dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Proface yang tersedia.