Proface HMI PFXGP4601TMD

Jual Proface HMI PFXGP4601TMD

Kami PT. RAT Menjual Proface HMI PFXGP4601TMD

Proface HMI PFXGP4601TMD Standard Specification :

Standard product information

Family

HMI

Series

GP4000 Series

Size

12″

Model

PFXGP4601TMA

Global Code

PFXGP4601TMA

Product Features

12″ AC Matrix

Repair Status

(Maintenance service is available, able to be maintained.)

Display specifications Proface HMI PFXGP4601TMD Yang Kami Jual

PFXGP4601TMD Electrical specifications

Rated input voltage

100 to 240 Vac

PFXGP4601TMD Input voltage limits

85 to 264 Vac

PFXGP4601TMD Rated frequency

50 / 60 Hz

Rated frequency range

47 to 63 Hz

Allowable voltage drop

1 cycle or less (Voltage drop interval must be 1 second or more.)

Power consumption

100 Vac: 44 VA or less, 240 Vac: 58 VA or less

In-rush current

30 A or less

PFXGP4601TMD Noise immunity

Noise Voltage : 1,500 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance

1,500 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications Proface HMI PFXGP4601TMD

International safety standards

Surrounding air temperature

0 to 55 °C [32 to 131 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

PFXGP4601TMD Ambient humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)

Storage humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)

Dust

0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s²
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s², X, Y, Z directions for 3 times

Electrostatic discharge immunity

Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

Proface HMI PFXGP4601TMD Memory

PFXGP4601TMD Application memory

When using GP-Pro EX:
– Media: FLASH EPROM
– Screen Area: 32MB *Use the screen area when the user font area’s capacity is exceeded – for example, when an image font or a picture font is used.
– User Font Area: 8MB
– Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
– Free Space: NoneRemovable System: No

Backup memory

When using GP-Pro EX:
– Screen Area: SRAM 320KB
– Variable Area: SRAM 64KBBattery: Replaceable battery / Primary battery for clock data backup

Clock accuracy

±65 sec./month (deviation at room temperature and power is OFF)

2*) Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

Interface specifications Proface HMI PFXGP4601TMD

PFXGP4601TMD Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2)

Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub 9 pin (plug)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
PFXGP4601TMD Power supply voltage: 5 Vdc ±5 %
PFXGP4601TMD Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

SD card

SD Card Slot x 1

Structural specifications Proface HMI PFXGP4601TMD

PFXGP4601TMD Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2mm² (AWG 14) or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)

Cooling method

Natural air circulation

PFXGP4601TMD Structure

IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)

External dimensions

W315 x H241 x D56 mm [W12.4 x H9.49 x D2.20 in.]

Panel cut-out dimensions

W301.5 x H227.5 mm [W11.87 x H8.96 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]

Weight

2.5 kg [5.5 lb] or less

the front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.

For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

pesan sekarang!

Setiap kode tipe HMI Proface terdiri dari kombinasi huruf dan angka yang mengidentifikasi model dan fitur-fitur tambahan yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Proface yang sesuai dengan kebutuhan aplikasi Anda untuk memilih HMI yang tepat. Sebagai distributor HMI Proface terpercaya, kami menyediakan berbagai tipe HMI Proface dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Proface yang tersedia.