pt-rat.com

General Trading Industrial Equipment
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
BRANDS WE SUPPLY
Menu

HMI Proface STW-6500WA

/ HMI, HMI – PRO FACE / Oleh

HMI Proface STW-6500WA

Jual HMI Proface STW-6500WA

Kami PT. RAT MenJual HMI Proface STW-6500WA.

HMI Proface STW-6500WA Standard product information :

Standard product information
Family
Web HMI
Series
STW6000 Series
Size
10″ Wide
Model
PFXSTW6500WAD
Global Code
PFXSTW6500WAD
Sales Status
Sale
Repair Status
(Maintenance service is available, able to be maintained.)

HMI Proface STW-6500WA Display specifications :

PFXSTW6500WAD Display type
TFT Color LCD
PFXSTW6500WAD Display size
10.1″ Wide
PFXSTW6500WAD Resolution
1,024 x 600 pixels (WSVGA)
Effective display area
W222.72 x H125.28 mm [W8.77 x H4.93 in.]
Display colors
16 million colors*1
Backlight
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%)
Brightness control
16 Levels (Adjusted with touch panel)
Touch panel type
Resistive Film (analog, single-touch)
Touch panel resolution
1,024 x 1,024
Touch panel lifetime
1,000,000 times or more

1*) For details about Display colors, refer to the manual for your screen editing software.

HMI Proface STW-6500WA Electrical specifications

PFXSTW6500WAD Rated input voltage
24 Vdc
Input voltage limits
19.2 to 28.8 Vdc
Allowable voltage drop
10 ms or less
PFXSTW6500WAD Power consumption
Max. 12.6 W
When power is not supplied to external devices: 9.6 W or less
When screen turns off the backlight (standby mode): 4.6 W or less
In-rush current
30 A or less
Voltage endurance
1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)
Insulation resistance
500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

HMI Proface STW-6500WA Environmental specifications

International safety standards
Surrounding air temperature
0 to 50 °C [32 to 122 °F]
Storage temperature
-20 to +60 °C [-4 to 140 °F]
Dust
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree
For use in Pollution Degree 2 environment
Corrosive gases
Free of corrosive gases
Air pressure (altitude range)
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrical fast transient/burst
IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports
Electrostatic discharge immunity
Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

HMI Proface STW-6500WA Interface specifications

USB (Type A)
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less
USB (micro-B)
–The USB (micro-B) interface is disabled.
Ethernet
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 2*2

2ETH1 and ETH2 have the same IP address and MAC address.

HMI Proface STW-6500WA Structural specifications

PFXSTW6500WAD Grounding
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals)
Cooling method
Natural air circulation
Structure
IP65F, Type 1, Type 4X (indoor use only), Type 13 (on the front panel when properly installed in an enclosure)*3
PFXSTW6500WAD External dimensions
W273 x H203 x D47 mm [W10.75 x H7.99 x D1.85 in.]
Panel cut-out dimensions
W255 x H185 mm [W10.03 x H7.28 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*4
Weight
Rear Module: 0.27 kg (0.6 lb) or less
Display Module: 0.49 kg (1.08 lb) or less

Note :

3*) For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in) and R in angle are below R3 (R0.12 in)

4*) For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

pesan sekarang!

Setiap kode tipe HMI Proface terdiri dari kombinasi huruf dan angka yang mengidentifikasi model dan fitur-fitur tambahan yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Proface yang sesuai dengan kebutuhan aplikasi Anda untuk memilih HMI yang tepat. Sebagai distributor HMI Proface terpercaya, kami menyediakan berbagai tipe HMI Proface dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Proface yang tersedia.