Jual HMI V9150iXD Hakko Fuji Electric Monitouch
Kami PT. RAT Menjual HMI V9150iXD Hakko Fuji Electric Monitouch.
V9 Advanced Lineup
V9101iW series
- V9101iWLD
- V9101iWRLD
V9071iW series
- V9071iWLD
- V9071iWRLD
V9 Standard Lineup
- V9150iX series
- V9150iXD
V9120iS series
- V9120iSD
- V9120iSB
- V9120iSDB
V9100iS series
- V9100iSD
- V9100iSB
V9080iS series
- V9080iSD
- V9080iSBD
V9 Lite Lineup
V9100iC series
- V9100iCD
- V9100iCB
- V9100iCBD
V9080iC series
- V9080iCD
- V9080iCBD
V9060iT series
- V9060iTD
- V9060iTBD
HMI Hakko V9150iXD Dimensions and Part Names
| V9150iXD | ||
|---|---|---|
| V9150iXD Power supply | Rated voltage | 100-240V AC/ 24V DC |
| Permissible range of voltage | AC: -15%, +10%/ DC: ±10% | |
| Permissible momentary power failure | AC within 20ms, DC within 1ms | |
| Demand (maximum rating) | AC: 90VA or less/ DC: 40W or less | |
| Insulation resistance | DC500V 10MΩ or more | |
| V9150iXD Physical environment | Ambient temperature | 0～40℃ *1 |
| Ambient humidity | 85%RH or less (without dew condensation) *1 | |
| Operation altitude | 2,000 meters or lower | |
| Atmosphere | Not to be exposed to corrosive gas, or conductive dust | |
| Storage temperature | -10～60℃ *1 | |
| Storage humidity | 85%RH or less (without dew condensation) *1 | |
| Overvoltage category | Category II | |
| Pollution degree | Pollution degree 2 | |
| V9150iXD Mechanical operating conditions | Resistance to oscillation | Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each) |
| Resistance to shock | Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total) | |
| Electric operating conditions | Resistance to noise | Noise voltage: 1,500Vp-p*2 , pulse width: 1μs, pulse rise time: 1ns |
| Resistance to static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | |
| V9150iXD Installation conditions | Grounding | Grounding resistance: Less than 100Ω, FG=SG |
| Structure | Protection structure: Front case: IP66, Type 4X/13 *3(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting | |
| Cooling system | Natural air cooling | |
| Dimensions W*H*D(mm) | 382.8×312.8×80.8 | |
| Panel cutout (mm) | 369.4×299.4（+0.5/-0） | |
| V9150iXD Case color | Front case:Silver Rear case:Light gray | |
| Material | Front case:Aluminum Rear case:PC resin |
- *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.
HMI Hakko V9150iXD Performance Specifications
| Screen memory (FROM) | 64MB | |
|---|---|---|
| Backup memory (SRAM) | 800KB | |
| V9150iXD Display | Display device | TFT color LCD |
| Resolution | 1024×768 | |
| Display size | 15″ | |
| Colors | 16.7 million *4 | |
| Backlight | LED | |
| Backlight life | 100,000 hours | |
| Touch switch | Type | Analog resistance film |
| Function switch | Quantity | 8 |
| V9150iXD External interface | D-Sub 9-pin (CN1) | RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*5 bps |
| Modular 8-pin （MJ1/MJ2） | RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps | |
| SD card | One card slot provided as standard | |
| Ethernet | 1ch, Baud rate: 100Mbps, 10Mbps | |
| Wireless LAN *6 | Complies with IEEE802.11b/g/n (2.4GHz) | |
| USB | Type A,Type mini-B(Ver.2.0) | |
| Sound output | 1ch provided as standard | |
| V9150iXD Clock | Backup period | 5 years (Ambient temperature 25°C) |
| Calendar accuracy | Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied) | |
| V9150iXD Standard | CE marking *3 | EN61000-6-2,EN61000-6-4,EN50581 *7 |
| UL･cUL *3*8 | UL61010-1、UL61010-2-201 | |
| KC *7 | Compliant | |
| Radio Act *6 | Japan: TELEC | |
| Classification Standard *3*7 | Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV) |
- *2: V9150iXD:1000Vp-p
- *3: DC products only.
- *4: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
- *5: Only for Siemens MPI (Incompatible with DUR-00).
- *6: Wireless LAN-compatible products only.
- *7: Wireless LAN compatible products are not supported.
- *8: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
pesan sekarang!
Setiap kode tipe HMI Hakko memberikan informasi tentang spesifikasi dan fitur-fitur yang dimiliki oleh HMI tersebut. Penting untuk memahami kode tipe HMI Hakko untuk memilih HMI yang sesuai dengan kebutuhan aplikasi Anda. Sebagai distributor HMI Hakko terpercaya, kami menyediakan berbagai tipe HMI Hakko dengan dukungan teknis yang handal. Hubungi kami sekarang untuk mendapatkan informasi lebih lanjut tentang tipe-tipe HMI Hakko yang tersedia. Hubungi Kami Sekarang!