Jual Micno KE300A-12 Single-Phase

Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Kami Jual Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter berkualitas Original dan dijamin keasliannya. Micno adalah merk dagang terkemuka yang telah dipakai hampir di semua pabrik yang ada di Indonesia. Kami siap memenuhi kebutuhan inverter Micno untuk Anda dengan cepat dengan harga bersaing di seluruh Indonesia.

Description of Inverter Micno KE300A-11 Series High Power And High Protection

For the civil power (220V), the motor uses 380V field application characteristics, developed a special product which designed with module boosting technology. Optimizing performance design will make the drive no longer complicated. It integrates PG-free vector control, multi-stage V/f control, torque control and soft start functions, and is widely used in applications where speed control accuracy, torque response speed, and low-frequency torque output have higher requirements

Specifications of Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Item	Technical Index	Specification
Input	Input voltage	1AC 220V±15%
Input frequency	47~63Hz
Output	Output voltage	0～rated input voltage
Output frequency	V/f control: 0~3000HzSensorless vector control: 0~300Hz
Operation command mode	Keypad controlTerminal controlSerial communication control
Frequency setting mode	Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.
Overload capacity	G model: 150% 60s, 180% 10s, 200% 3s P model: 120% 60s, 150% 10s, 180% 3s
Starting torque	0.5Hz/150% (SVC); 1Hz/150% (V/f)
Speed adjustment range	1:100 (SVC), 1:50 (V/f)
Carrier frequency	1.0-16.0kHz，automatically adjusted according to temperature and load characteristics
Frequency accuracy	Digital setting: 0.01HzAnalog setting: maximum frequency * 0.05%
Torque boost	Automatically torque boost; manually torque boost: 0.1%~30.0%
V/f curve	Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
Acceleration/decele ration mode	Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s
DC braking	DC braking when starting and stoppingDC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s
Jog operation	Jog operation frequency: 0.0Hz~maximum frequencyJog acceleration/deceleration time: 0.1s~3600.0s
Simple PLC & multi-step speed operation	It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal.
Built-in PID	Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)
Automatic voltage regulation	Keep output voltage constant automatically when input voltage fluctuating
Control Function	Common DC bus	Common DC bus for several inverters, energy balanced automatically
Torque control	Torque control without PG
Torque limit	“Rooter” characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process
Wobble frequency control	Multiple triangular-wave frequency control, special for textile
Timing/length/counting control	Timing/length/counting control function
Over-voltage & over-current stall control	Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping
Fault protection function	Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function
Input/output terminals	Input terminals	Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI: AI1: 0～10V or 0/4～20mA A12: 0～10V or 0/4～20mA
Output terminals	1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V
Communication terminals	Offer RS485 communication interface, support MODBUS-RTU communication protocol
Human machine interface	LED display	Display frequency setting, output frequency, output voltage, output current, etc.
Multifunction key	QUICK/JOG key, can be used as multifunction key
Environment	Ambient temperature	-10℃～40℃, derated 4% when the temperature rise by every 1℃(40℃～50℃).
Humidity	90%RH or less (non-condensing)
Altitude	≤1000M: output rated power, ＞1000M: output derated
Storage temperature	-20℃～60℃
Storage environment	Indoor, no direct sunlight, dust, corrosive gas, flammable gas, oil mist, steam, dripping water, salt, vibration

Selection Table of Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

on table
Classic Case
Download

Model	Motor	Rated Input Amperage（A）	Rated output Amperage（A）
kW	HP
1AC 220V Input/3AC 380V Output
KE300A-12-0R7G-T4	0.75	1	10	2.1
KE300A-12-1R5G-T4	1.5	2	15	3.8
KE300A-12-2R2G-T4	2.2	3	23	6
KE300A-12-004G-T4	4.0	5	42	9
KE300A-12-5R5G-T4	5.5	7.5	60	13
KE300A-12-7R5G-T4	7.5	10	80	17
KE300A-12-011G-T4	11	15	110	25
KE300A-12-015G-T4	15	20	150	32
KE300A-12-018G-T4	18.5	25	180	37
KE300A-12-022G-T4	22	30	220	45

MICNO industrial AC speed drives adopt world-class vector control technology and they can be equipped with rich function expansion cards, flexible application, stable operation

Pesan Sekarang

Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Description of Inverter Micno KE300A-11 Series High Power And High Protection

Specifications of Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Selection Table of Inverter Micno KE300A-12 Single-Phase 220-In, Three-Phase 380-Out Special Inverter

Tipe Industrial Inverter Micno Lainnya